Reference Electrode Restore Kit, Cold Weather Use

Description

Restore kit contains Anti-Freeze Solution and Copper Sulfate Crystals for all copper sulfate electrodes.
Restore kit meets suggested NACE standards for care of copper sulfate electrodes.
Restore kit contains enough restore materials to restore and repair two (2) electrodes.
Plastic bottles sized for direct pour into electrode body thus preventing spill and waste.
Anti-Freeze Solution and Copper Sulfate Crystals are pre-measured for direct filling of electrodes.

Product Information

Cold Weather Solution	2 – 30 ml plastic bottles with liquid pour caps with Glycerin, Copper Sulfate, and Distilled Water forming an Anti-Freeze Solution (prevents freezing down to -10˚F (-23ºC).
Copper Sulfate	2 – 28 mL plastic bottles with press caps with fine crystal high purity (99.8%) copper sulfate.
Restore Material	2 – ¼ -20 Knurled Nuts (Brass) 2 – ¼ - 20 Hex Nuts (Zinc-coated steel) 6 – EPDM O-Rings (SAE J200) 1 - 4 sq inch green (medium abrasion) scratch pad 1 - 4 sq inch silicon carbide emery sanding cloth
Package	8 x 4 x 1-¼ inch injection molded plastic case with dividers

Description

Restore kit contains Anti-Freeze Solution and Copper Sulfate Crystals for all copper sulfate electrodes.
Restore kit meets suggested NACE standards for care of copper sulfate electrodes.
Restore kit contains enough restore materials to restore and repair two (2) electrodes.
Plastic bottles sized for direct pour into electrode body thus preventing spill and waste.
Anti-Freeze Solution and Copper Sulfate Crystals are pre-measured for direct filling of electrodes.

Product Information

Cold Weather Solution	2 – 30 ml plastic bottles with liquid pour caps with Glycerin, Copper Sulfate, and Distilled Water forming an Anti-Freeze Solution (prevents freezing down to -10˚F (-23ºC).
Copper Sulfate	2 – 28 mL plastic bottles with press caps with fine crystal high purity (99.8%) copper sulfate.
Restore Material	2 – ¼ -20 Knurled Nuts (Brass) 2 – ¼ - 20 Hex Nuts (Zinc-coated steel) 6 – EPDM O-Rings (SAE J200) 1 - 4 sq inch green (medium abrasion) scratch pad 1 - 4 sq inch silicon carbide emery sanding cloth
Package	8 x 4 x 1-¼ inch injection molded plastic case with dividers