By continuing to browse this website or by clicking 'I Accept', you agree to the use of cookies. Cookies are stored on your computer or mobile device and enhance your site experience. To learn more about how we use cookies, you can click the 'Learn More' button.
Two corrosion protection applications in one product: primer and coating.
Available in:
1-Pint Kits, 4 per case
1-Quart Kits, 2 per case
1-Gallon Kits, 2 per case
Description
Tapecoat TC 7000 High-Temperature Epoxy is a surface tolerant two-component 100% solids material that replaces VOC base primers. It is manufactured to be used as a one-coat wet or dry primer with Tapecoat hot and cold applied tapes.
TC 7000 can also be applied as a stand-alone coating for metal surfaces above or below ground, where it provides superior corrosion protection and exceptional flow characteristics with self-leveling attributes.
Use as a single coat primer prior to wrapping with Tapecoat hot or cold applied tapes.
Use as a stand-alone coating on metal surfaces. For added impact and abrasion resistance, use TC reinforcing scrim.
Technical Data
Color
Red
Pot Life
15 to 20 minutes @ 70°F (21°C) and 50% relative humidity (R.H.)
Surface must be clean and dry. Commercial blast to SSPC-SP6. Remove oil and grease with a suitable solvent. Salt and other contaminants may be removed by high-pressure fresh water cleaning.
Pour entire contents of Part B Curing Agent (small container) into Part A Resin (large container)/ Mix thoroughly for approximately 3 to 5 minutes. Do not alter the amounts of A and B in the mixture.
Apply epoxy by brush, pad, roller or spray. Primer should be dry to touch before applying Tapecoat hot-applied tapes or sleeves.
Tapecoat rpolyethyleneeinforcing scrim can be applied over wet epoxy to add reinforcement and impact resistance. After the scrim has been applied, apply a second coat of TC 7000 Epoxy.
Application Parameters
Environment
Use only when the surface to be coated is above 40°F (4°C) and the relative humidity (R.H.) is less than 90%.
Application Temperature
40°F-200°F (4°C-93°C). Surface temperature must be 5°F (3°C) above dew point to avoid condensation.
Cure Time
60 to 90 Minutes at 70°F - 80°F (21°C-27°C) and 50% R.H. Cure time can be accelerated by preheating the metal surface to 100°-200°F (38°-93°C).
Recommended Coverage
As a 1-Coat Primer: 6-10 mils thickness, with a coverage of 220 sq. ft. per mixed gallon (5.4 m2 per liter). As a 2-Coat Stand-alone Coating with Scrim: 16-30 mils (0.41-0.76 mm) thickness. This is 2 coats of 8-15 mils (0.20-0.38 mm) each).
Packaging
Container Size
Coverage as a 1-coat primer at 6 mils
Coverage as a 2-coat coating at 12 mils
Pint can base (Part A) and 1/2 pint can cure (Part B), total mixed volume: 1.5 Pints.
45 sq. ft.
22.5 sq. ft.
Quart can base (Part A) and Pint can cure (Part B), total mixed volume: 1.5 qt.
90 sq. ft.
45 sq. ft.
Gallon can base (Part A) and 2 qt. cans cure (Part B), total mixed volume: 1.5 Gallons.
360 sq. ft.
180 sq. ft.
Description
Tapecoat TC 7000 High-Temperature Epoxy is a surface tolerant two-component 100% solids material that replaces VOC base primers. It is manufactured to be used as a one-coat wet or dry primer with Tapecoat hot and cold applied tapes.
TC 7000 can also be applied as a stand-alone coating for metal surfaces above or below ground, where it provides superior corrosion protection and exceptional flow characteristics with self-leveling attributes.
Use as a single coat primer prior to wrapping with Tapecoat hot or cold applied tapes.
Use as a stand-alone coating on metal surfaces. For added impact and abrasion resistance, use TC reinforcing scrim.
Technical Data
Color
Red
Pot Life
15 to 20 minutes @ 70°F (21°C) and 50% relative humidity (R.H.)
Surface must be clean and dry. Commercial blast to SSPC-SP6. Remove oil and grease with a suitable solvent. Salt and other contaminants may be removed by high-pressure fresh water cleaning.
Pour entire contents of Part B Curing Agent (small container) into Part A Resin (large container)/ Mix thoroughly for approximately 3 to 5 minutes. Do not alter the amounts of A and B in the mixture.
Apply epoxy by brush, pad, roller or spray. Primer should be dry to touch before applying Tapecoat hot-applied tapes or sleeves.
Tapecoat rpolyethyleneeinforcing scrim can be applied over wet epoxy to add reinforcement and impact resistance. After the scrim has been applied, apply a second coat of TC 7000 Epoxy.
Application Parameters
Environment
Use only when the surface to be coated is above 40°F (4°C) and the relative humidity (R.H.) is less than 90%.
Application Temperature
40°F-200°F (4°C-93°C). Surface temperature must be 5°F (3°C) above dew point to avoid condensation.
Cure Time
60 to 90 Minutes at 70°F - 80°F (21°C-27°C) and 50% R.H. Cure time can be accelerated by preheating the metal surface to 100°-200°F (38°-93°C).
Recommended Coverage
As a 1-Coat Primer: 6-10 mils thickness, with a coverage of 220 sq. ft. per mixed gallon (5.4 m2 per liter). As a 2-Coat Stand-alone Coating with Scrim: 16-30 mils (0.41-0.76 mm) thickness. This is 2 coats of 8-15 mils (0.20-0.38 mm) each).
Packaging
Container Size
Coverage as a 1-coat primer at 6 mils
Coverage as a 2-coat coating at 12 mils
Pint can base (Part A) and 1/2 pint can cure (Part B), total mixed volume: 1.5 Pints.
45 sq. ft.
22.5 sq. ft.
Quart can base (Part A) and Pint can cure (Part B), total mixed volume: 1.5 qt.
90 sq. ft.
45 sq. ft.
Gallon can base (Part A) and 2 qt. cans cure (Part B), total mixed volume: 1.5 Gallons.
Surface must be clean and dry. Commercial blast to SSPC-SP6. Remove oil and grease with a suitable solvent. Salt and other contaminants may be removed by high-pressure fresh water cleaning.