Copper Sulfate Crystals (lb. 3 oz.) by Farwest Corrosion

SKU#: 05-10000
For Recharging Standard, Portable Reference Electrodes

Copper sulfate crystals are used to recharge portable, copper-copper sulfate reference electrodes used in the cathodic protection testing. Simply mix the copper sulfate crystals with distilled water to recharge the electrode. At the same time, it is a good time to clean the internal copper rod with an abrasive product such as sand paper or a scouring pad but do not use emery cloth as this introduces metal onto the copper rod.

Active Ingredients
- Copper Sulfate Pentahydrate......... 99%
- Other Ingredients............................ 1%
- Total........................................... 100%
Caution
Avoid contact with eyes, sking and clothing.

Wash thoroughly after handling.

Dispose of copper sulfate properly and according to company or environmental regulations

Copper sulfate crystals are used to recharge portable, copper-copper sulfate reference electrodes used in the cathodic protection testing. Simply mix the copper sulfate crystals with distilled water to recharge the electrode. At the same time, it is a good time to clean the internal copper rod with an abrasive product such as sand paper or a scouring pad but do not use emery cloth as this introduces metal onto the copper rod.

Active Ingredients

Copper Sulfate Pentahydrate......... 99%
Other Ingredients............................ 1%
Total........................................... 100%

Caution

Avoid contact with eyes, sking and clothing.
Wash thoroughly after handling.
Dispose of copper sulfate properly and according to company or environmental regulations