By continuing to browse this website or by clicking 'I Accept', you agree to the use of cookies. Cookies are stored on your computer or mobile device and enhance your site experience. To learn more about how we use cookies, you can click the 'Learn More' button.
Heat shrinkable, high temperature joint protection for pipes & pipelines
Description
The CANUSA-CPS Multi-Layer System is a heat shrinkable joint protection system which consists of three layers - crosslinked polyolefin backing, hot melt adhesive, and a two-part epoxy primer. This new and improved Multi-Layer System, designed for operating temperatures up to 80ºC (75ºF), combines excellent corrosion protection with lower pipe preheat temperatures than required with comparable sleeves of traditional design. The three-layer sleeve system is fully compatible with Fusion Bonded Epoxy and with-direct bond or three-layer polyethylene line coatings.
Historically, achievement of superior performance levels at these temperatures would require a two-layer sleeve or tape with a hot-melt adhesive requiring very high pre-heat temperatures. The new Multi-Layer System can achieve high adhesion to steel with significantly lower preheat in the field. Lower pre-heat will save both time and money during pipeline construction. The Multi-Layer System will provide pipeline joint protection with long-term integrity.
Features
Fast, reliable installation
No special tools or training
Can inspect epoxy application prior to sleeve installation
High build epoxy primer
One-piece sleeve configuration
Broad range of product sizes
Advantages
Field friendly
Long term pipeline integrity
No high pre-heat required
Does not require highly skilled installers
Lower installed cost
Minimizes entrapped air
Ensures maximum epoxy primer protection
Description
The CANUSA-CPS Multi-Layer System is a heat shrinkable joint protection system which consists of three layers - crosslinked polyolefin backing, hot melt adhesive, and a two-part epoxy primer. This new and improved Multi-Layer System, designed for operating temperatures up to 80ºC (75ºF), combines excellent corrosion protection with lower pipe preheat temperatures than required with comparable sleeves of traditional design. The three-layer sleeve system is fully compatible with Fusion Bonded Epoxy and with-direct bond or three-layer polyethylene line coatings.
Historically, achievement of superior performance levels at these temperatures would require a two-layer sleeve or tape with a hot-melt adhesive requiring very high pre-heat temperatures. The new Multi-Layer System can achieve high adhesion to steel with significantly lower preheat in the field. Lower pre-heat will save both time and money during pipeline construction. The Multi-Layer System will provide pipeline joint protection with long-term integrity.
Features
Fast, reliable installation
No special tools or training
Can inspect epoxy application prior to sleeve installation
